|
4665 |
Click on the above
image for a full
view ... |
|
A quality solid state echo unit housed in a matt black case. The front panel accommodates all the controls and input/output jacks. The unit provides two standard 6ยท 35mm (1/4in.) input sockets, a low impedance (50dB 10k ) socket for the microphone and a (-20dB 330k) socket for instruments and line outputs of hi-fi, organ, synthesisers, etc. There is a footswitch jack on the front panel for a remote control switch.The delay time control is variable between 30 and 200ms and there are three selectable output levels of (0, -20dB and -40dB) to allow connection to any amplifier. There is also a peak level indicator to show when the input level is too high and likely to cause distortion.The balance control adjusts the equilibrium of direct/ echo sound and may be set to minimum to allow direct (no echo), or through to maximum (total echo). |
| The repeat control sets the echo sound repetition rate and the dial is rotated clockwise to increase the speed. |
| Case size: 245 x 150 x 61mm. |
|
